Ancel 12V Automotive Car Battery Tester Charging Cranking Test Analyzer 2000CCA

Description

Store category
Sign Up Now !
You may also like
Ancel 12V Automotive Car Battery Tester Charging Cranking Test Analyzer 2000CCA
Product Description
ANCEL BST100 Car Battery
Charger
Tester Analyzer 12V 2000CCA Voltage Battery Test
Quick Cranking Charging
Circut Tester Auto Diagnostic Tool PK KW600
Product
Description:
Ancel BST100 battery tester is used for lead-acid starting battery, along with checking the following conditions of the battery, starting up, charging, and loading. With great design, easy operation, precise reading, complete functions, this tester supply the readings by a large LCD and hints by sound and light when testing. It utillizes 4-wire kelvin method to complete collection of a series of complicated data for calculating every testing data with build-in precise circuit and improved digital processor. moreover some circuit improvements including polar reversal protection, over voltage input protection, loose lead detection, ensure safety and convenience during testing. So this is the best tool in the fields of battery sales, vehicle repair and battery inspection in equipment system associated with lead-acid starting battery.
Why choose BST100 products?
1.
Small compact design, scan faster and indicates test results directly. Even a beginner can use this unit to analyze any 12V batteries healthy, tells you everything about the battery: voltage, charge, cranking power, and how much life is left in the battery (level of Ohm resistance). Does it quickly and precisely.
2.Much wider test range (100-2000 CCA) and more accurate compared to its competitors. Test results based on
CCA,BCI,CA,MCA,JIS,EN,DIN,SAE,GB
and IEC Standards.
3.Provides check the Alternator's charging and Starter's cranking conditions. Vehicle charging system test is also available, including load voltage, unloaded voltage, ripple status and charging system status.
4.The Ancel BST100 battery tester is well built with a large LCD display, indicates test results directly. no internal batteries required and gets the power directly from the 12V battery.
5.It's equipped with cable and made of a very thick flexible insulator, much safer than others selling on the marketplace. There are 4 buttons on BST100, The up/down button for scrolling the menu. The Enter and Exit button allow for navigation back and entering menu.
ANCEL BST100 Function:
1.Identify battery status Good or Replace
2.Check Battery Capacity - Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating.
3.Check Internal resistance value (Ohm)
4.Display battery life in percentage (%)
5.Battery Cranking Test, load test
6.Battery Charging Test, Ripple Test
7.Support battery ripple test and review test data
BST100 12V Battery Tester Features:
1.Fast and smooth running speed with STM-32 chip set hardware
2.Accurate test results, using high precision amplifier and calibrated by professional battery testing tool, BST100 reading accuracy up to 99%.
3.Wide testing range cover from CCA 100- 2000 , 3- 220 AH, best in the market.
4.Industry initiative graphical battery voltage real time monitoring, can be analysis battery data more accurate.
5.Unique battery results display in percentage and meter mode.
6.Test all automotive cranking lead acid battery, including ordinary lead acid battery, AGM flat plate battery, AGM spiral battery, and Gel battery, etc.
7.Polarity reverse connection protection, reverse connection will not damage the tester or affect the vehicle and battery.
8.Directly test the battery with loss of electricity, no need to full charge before testing.
9.Testing standards include currently the world's majority of battery standards, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
10.BST100 is used to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL EPB cell
The BST100 Advantage:
Simple and easy to use
Tests batteries on and off the vehicle
Accurate results in milliseconds
Battery life analysis
Analysis results: Good or Replace
Large easy to read LCD screen
Test results based on CCA,BCI,CA,MCA,JIS,EN,DIN,SAE,GB and IEC
Standards
Quick test - inputs battery volume (AH), then shows battery status
Vehicle cranking system test - cranking time, voltage and statu
Vehicle charging system test—load voltage, unloaded voltage, ripple status, and charging system status
Ancel BST100 Car Battery Tester Application
Use to test a wide range of 12V batteries (Starting [SLI], Deep Cycled and Marine) of Wet (Flooded), VRLA or Maintenance Free (MF), Sealed Maintenance Free (SMF), Absorption Glass Mat (AGM) and GEL cell. The major battery standards JIS, SAE, EN, DIN and IEC are supported.
BST100
Support Languages
:
English, French, German, Russian, Spanish, Italian
Advantages of this method:
(1) It can be used for checking almost all the batteries including low capacity battery and internal resistance of the notebook battery exclusively.
(2) It will not harm the battery by using this method.
FQA 1. What is the measurement principle of this tester?
The battery will gradually be aged with an increase in time. The main reason is that it can no longer generate some effectively chemical reaction because of the aging of the surface of the battery plate. International Electric and Electronic Engineer Association(IEEE) formally looks the Conductivity Test as one of the standards of checking lead-acid storage batteries. It points out from IEEE standard 1118-1996 that: Conductivity Test is used to test AC current generated by putting the known frequency and amplitude AC signal to both sides of the battery. AC conductivity value is the ratio of AC current signal which keeps the same phase with AC voltage and the AC voltage. This tester is designed from this principle actually.
FQA 2. Is the result affected by the installation of negative current for the vehicle?
All the negative currency will affect the result. Therefore please remove the negative currency before checking, to achieve the accurate data.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept
PayPal
payment.
Please contact us if you need to use another method to pay.
Payment should be made within
3 days
after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
We are not responsible for buyers’ local taxes.
Please include your special requests in eBay note if there is any.
Delivery details
Order will be shipped within
1 business
day
after payment confirmed via
UPS or USPS or FedEx Ground
from our
wa
rehouse
in
United
S
tate
.
Delivery time varies from
2 to 6
business days.
We will ship according to your
EBAY
address
.
Please make sure it’s correct and include
phone number
for delivery.
If you do not receive your order in the estimated time, please contact us.
Terms of sales
12 months
free repair for the devices.
3 months
for the accessories.
Items should be returned on buyers’ cost for repair or replacement.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us in
7 days
and keep it
unused
.
We will instruct you on how to return and get refund or replacement.
If after 7 days, or the item has been used, we have the right to decline your claim.
About us
Who We Are?
We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years.
What Do We Have?
We have office and warehouse in Australia and US to ensure fast shipment and after-sale service.
We have more than 50 employees devoting to customer satisfaction.
Contact us
Our customer-oriented service strives for positive feedbacks
with all 5 star selling ratings.
Please feel free to contact us via eBay message once you have any question.
We will reply in 24 business hours.
Business time:
GMT8 (9:00-18:00) from Monday to Friday.