Auto Car Van 12V Battery Tester 2000CCA Cranking Charging Test Analyzer GEL AGM

Description

Auto Car Van 12V Battery Tester 2000CCA Cranking Charging Test Analyzer GEL AGM
This KW208 automotive battery tester is able to effectively analyze and read important car data such as voltage,
internal resistance, cold cranking amp and AH capacity, battery health and charge status.
It provides accurate results, calculates the cold cranking capability of the battery and the aging extent, allowing for aquicker, more precise car repairing. Beginner or expert, this car battery diagnostic tester can be used with a wide selection of 12V 100-000 CCAregular flooded batteries, AGM flat plate, AGM spiral, as well as GEL batteries.
Features:
- System voltage 12 Volts and Voltage test in waveform;
- Test Result Good, Recharge or Replace;
- Capacity Cold Cranking Amps (CCA), DIN, EN and IEC information relative to battery rating. Internal resistance value (mΩ)
and Life in percentage (%);
- Cranking system and Charging system;
- Record and re-play battery data, Life-time free update service;
- Battery test, cranking test, charging test and other additional functions;
- The major battery standards CA,CCA,BCL,MCA,JIS,SAE,EN,GB,DIN and IEC are supported.
KONNWEI KW208 Support Measure Standards:
Use a test a wide range of 12v batteries(Starting{SLI},Deep Cycled and Marine) of Wet(Flooded),VRLA or Maintenance Free (MF),
Sealed Maintenance Free (SMF), Absorption Glass Mat(AGM),EFB and GEL Cell.
1.CCA:100-2000
2.BCI:100-2000
3.CA:100-2000
4.MCA:100-2000
5.JIS:26A17-24SH52
6.DIN:100-1400
7.IEC:100-1400
8.EN:100-2000
9SAE:100-2000
Test Operation Steps of KW208 Car Battery Tester:
Step 1. Connect the 12V battery, red clips to positive pole and black clips to negative pole.
Step 2. Battery Test: Firstly select the type of battery to be tested, then the test criteria and the test range, and then you have the
results within few seconds.
Step 3. Cranking Test: After selecting the cranking test function, follow the prompts to start the engine.  Test completed.
Step 4. Charging Test: After entering the charging test function, follow the prompt to increase the speed to 2500 RPM for 5
seconds, then press OK. Test completed.
Specifications:
- Type: 12V Car Battery Tester
- Test Range: 100-2000CCA
- Screen Size: 2.4 Backlit LCD
- Compatible Battery: 12V Regular Flooded, AGM Flat Plate, AGM Spiral, GEL batteries
- Supported Battery Type: CCA/ICE/BCI/EN/CA/DIN/MCA/SAE/JIS
- Health and Charge and Cranking Test: Yes
- Data Review/Storage: Yes
- Supported Languages: English, German, French, Dutch, Russian, Spanish, Italian ,Portuguese.
- Accurancy: 99.5%
- Application: PORTABLE
- Battery Type: Car/Marine/Boat/Motorcycle
- Gross Weight: 0.24 kg
Package Includes:
1 x KONNWEI KW208 Auto Diagnostic Scanner(With white backlight only/not the blue backlight)
1 x User Manual
We accept online payments managed by eBay.
Item will be sent out by USPS or other carrier accrodingly.
No local pickup.
We reserve the right to change the shipping method without notifying customers.
We have multi-warehouses in NY/CA/KY/TX,so your item may not be sent from the warehouse which stated in the item location.
Please send us a eBay message if there is any problem with your order before leaving us a negative feedback/low DSR rating/opening a return case, we will reply within 24 hours.