Automotive OBD2 Scanner ABS SRS Engine Check with ABS Bleed SAS Calibration Tool

Description

FOXWELL NT630 Plus OBD2 Scanner ABS SRS Code Reader Automotive OBD II SRS Airbag Diagnostic and ABS Brake Bleed Scan Tool
Never Miss this Comprehensive Foxwell NT630 Plus Code Reader Scan Tool!
This innovative NT630 Plus ABS Airbag Light Reset Tool with SAS Function does not only have extensive coverage of vehicles but it can also provide accurate and professional diagnosis of ABS, SRS, Airbag and SAS faults. Perform the BIDIRECTIONAL SCAN FUNCTIONS for ABS/ SRS systems.This new NT630 OBDII scan tool is just the wonderful automotive tool that professional mechanics can’t wait to have.
--- ABS Auto Bleed to keep a firm brake pedal
--- ABS/ SRS(Airbag) Bi-directional Test/ Active Test
--- ABS/ SRS Reset & SAS Calibration
--- ABS/ SRS/ Airbag/ SAS/ OBD2 modules diagnosis & Warning light Off
--- Auto VIN + Live Data + Freeze Frame
--- Lifetime update, NO subscription
Why is Foxwell Scanner NT630 Plus?
Powerful Features that you can not find any other car diagnostic scanners under USD200:
ABS Auto Bleed:
The air will get inside when the brake system opened to replace components such as calipers, wheel cylinders, the master cylinder, or brake lines or hoses. To get a firm brake pedal, the air has to be removed by bleeding the brakes. This abs auto bleed scan tool will help bleed the brake, cycling the pump and valves during the bleeding process.
Bidirectional Control/ Active Test
: Do the active test on the ABS/Airbag system and components, including Auto Bleed Test/ Setup SDM Serial Number/ ABS Manual Control Tests/ ABS Motor Test/ ABS Version Test/ Actuator Tests, etc.
4 Modules Diagnosis:
Scan ABS/SRS/Airbag/SAS/ OBD2 modules error faults to check the issues that caused the warning light on and turn off the MIL after maintenance.
ABS/ Airbag Light Reset Tool
: Reading ABS and SRS/ Airbag error codes, point out the car issues and guide you to repair them. Besides the normal diagnostic functions that others can do, it will reset the ABS & SRS system after maintenance to let the ECU identify the new components to make it work normally.
SAS(Steering Wheel Angle Sensor) Calibration
: calibrates of the steering angle sensor and stores the current steering wheel position as straight-ahead in the sensor EEPROM. On successful calibration of the sensor, its fault memory is automatically cleared.
Self-Check E-mission Condition
: Scan all OBD2 modules, show the I/M readiness status and check if the vehicle is ready for the annual inspection of S-M-O-G test.
Super Cost-effective to Get a Bidirectional Scan tool!
--- ABS/SRS/ Airbag Bidirectional Control/ Active Test ---
The abs scan tool code reader temporarily allows you to do bi-directional diagnostic tests on the system and components of anti-lock brake systems and air bags, sends commands to the integrity of abs srs systems or vehicle’s modules to test the working status without using the vehicle controls and and when you exit the test, the system/component returns to normal operation. (Note: All the functions mentioned are up to your vehicle condition, please confirm the compatibility before purchase!)
Kind reminder:
1. Before bleeding the brake system, make sure no diagnostic codes are presen.
2. Do not let the master cylinder run dry during the brake bleeding procedure.
3. After bleeding the brake system, check the brake pedal for excessive travel or a “spongy” feel. Bleed again if either condition is present.
Auto Bleed Test, Automated Bleed, or Service Bleed
– removes air from the internal brake fluid chambers after servicing the brakes.
ABS Manual Control Tests
– allows to manually control the actuators in order to test ABS motors, solenoids, solenoid enable relays, EMBs, and more.
ABS Motor Test
– allows to manually control the ABS pump motor.
ABS Version Test
– displays the name of the brake system and the ABS controller version number, software ID, and sequence value.
Actuator Tests
– allows to manually control the actuators in order to test AYC valves, inlet valves, outlet valves, pump motors, and TRACS valves.
Automated Test
- automatically commands each solenoid valve and the pump motor on and off to test for proper operation.
Brake Bleed Preparation Test
- prepares the brake lines for bleeding by clearing air from the modulator. The test rehomes all the ABS and TCS motors, cycles the TCS motors, and then returns all motors to the “home” position at the bottom of the bore.
Setup SDM Serial Number (Air-Bag Sensing and Diagnostic Module)
- allows to program a new air bag serial number into the dash integration module (DIM). You use this test after installing a new air bag; otherwise a diagnostic trouble code will be set when you turn on the ignition.
Function Test
- automatically commands the ABS relay, valve solenoids, and pump motor on and off to test for proper operation. Gear Tension Relief Test - relieves tension from the ABS motor gears so you can separate the ABS motor pack from the ABS hydraulic modulator. Hydraulic Control Tests - allows to manually engage and disengage the ABS solenoids for troubleshooting the hydraulic functions. Idle Up Manual Control Test - allows to manually control the idle up actuators. Lamp Tests - allows to manually control the ABS or TCS warning or indicator lamps. Motor Rehome Test - prepares the brake lines for bleeding by clearing air from the modulator. The test returns all ABS motors to their “home” positions. Pump Motor Tests - allows to manually control the pump motor. Relay Test - allows to manually engage and disengage either the ABS or TCS relays in order to test relay operation. Requested Torque Test - allows to manually control the engine torque to test for proper operation of the traction control system (TCS). Solenoid Tests - allows to manually control the inlet and output valve solenoids. System Identification - displays information about the brake system, the vehicle, and the ABS controller. TCS Test - allows to control the pump motor in order to apply fluid pressure to the front wheel circuits. Traction Control System (TCS) Manual Control Tests - allows to perform motor tests and an adjuster assembly control test. Voltage Load Test - “loads” the ABS battery supply circuit to test for adequate battery capacity.
Powerful CEL ABS SRS SAS AIRBAG LIGHT Fix!
Professional OBD2 Scanner Diagnostic Tool
Enhanced OBD2 Scanner - I/M Readiness Status
This Foxwell Scanner NT630 Plus conduct a simulated s-m-o-g test, you can do the same self-check work a service shop will do before it signs off on a smog certificate and give you a feedbck if the car will pass or fail in its current condition.
Enhanced OBD2 Code Reader - On-Board Monitors Test
Foxwell NT630 plus OBD2 scanner supports all OBD2 monitors, including Misfire Monitors, Fuel System Monitors, Comprehensive Components Monitors, Catalyst Monitors, Heated Catalyst Monitors, Evaporative System Monitors, Secondary Air System Monitors, Air Conditioning Refrigerant Monitor, Oxygen Sensor Heater Monitor and etc.
Enhanced OBDII Scan Tool- EVAP Test
The EVAP system is a closed system that captures fuel tank vapors and prevents them from escaping into the atmosphere. When your engine light comes on because of a weakness or failure in this system, you most likely won’t notice the car driving any differently.
SRS Reset Tool
Compared to other SRS scanners, Foxwell NT630 Plus can reset the airbag control module after airbag replacement.
ABS Code Reader
Reads and clear codes and turns off ABS Airbag warning indicator. Shows you ABS live data, for instance, the speed of each wheel, ESP sensors data, Brake assists, data and CAN signals data.
SAS(Steering Wheel Angle Sensor) Scanner
Steering wheel angle sensor reset. Steering wheel angle sensor, a component of vehicle stability control system, is mainly installed in the direction column below the steering wheel. It delivers SAS calibration on more than 30 vehicle makes.
Bi-directional Scan Tool/ Active Test
This abs scan tool will temporarily activate or control the system or component of abs/airbag and check the electronic components such as switches, sensors, relays, and actuators.
For example, if "Press Brake Pedal" displays, you have to press and hold the brake pedal and then continue. The sequence, number and type of tests are dictated by the control module.
AutoVin
Auto VIN is a shortcut for the VIN reading menu, which typically includes the following options:
Automatic VIN Acquisition
Manual input VIN
If it takes too long to get the VIN code automatic, press Cancel to stop and input the VIN manually. (Note: Some models may does not support auto vin function, please also type it in manually.)
Download FoxAssist to Upgrade
Update Steps as below(There is a video of update steps in product page for your reference):
1. Register on
foxwelltechdotus
and Download FoxAssist from NT630 Plus page.
2. Install FoxAssist and Register an account.
3. Activate by inputting the serial number of your NT630 Plus.
4. Connect the scanner with PC via USB cable, then you can choose the car makes to update.
2 in 1 Live Data
Reading vehicles codes and show you real-time live sensor data in text and graph. You can monitor the live data to check if there are some faults with your vehicle.
Shows 2 PIDs simultenouly and supports merge them into one to compare.
Error Codes Definition
No more on-line search. Built-in DTC lookup library, retrieves generic (P0, P2, P3, and U0) and manufacturer specific (P1, P3, and U1) code, show the code definitions. Help you to find the cause of warning light, and point you in the direction of where the problem was.
Handheld Carrying Case
Compare to the others' nylon storage case, this handheld carrying case will be harder and more robust to reduce scratch and collision. Handheld type will more convenient for carrying the car scanner to your repair position.
Foxwell NT630 Plus  Diagnostic Coverage:
NT630
America
Coverage (from 1996
and newer
)
For Chrysler, For Ford, For GM, For Brazilian GM (For Brazilian Market Only)
NT630
Asian
Coverage
(from2004
and newer
)
For Au Ford, For Acura, For Daewoo, For Honda, For Hyundai, For Holden,
For Infiniti, For Isuzu, For Kia,For Lexus, For Mazda, For Mitsubishi,
For Perodua, For Proton, For Scion, For Subaru, For Suzuki
NT630
European
Coverage
(from2003 and newer )
For Abarth, For Alfa-Romeo, For Audi, For Bentley, For BMW, For Bugatti, For Citroen, For Dacia, For EU Ford, For Fiat, For Jaguar, For Lancia, For Land Rover, For Maybach, For Mercedes Benz, For Maserati, For Mini, For Opel, For Peugeot, For Porsche, For Renault, For Rolls-Royce,
For Saab, For Seat, For Skoda, For Smart, For Sprinter, For Vauxhall, For Volvo, For VW
Foxwell NT630 Plus Reset function Support List
ABS & SRS Support Car List
for Abarth,for Acura,for Alfa,for Audi,for Bentley,for Mercedes Benz,for BMW,for Bugatti,for Chrysler,for Citroen,for Dacia,for Fiat,for Ford,for GM(for Buick,for Daewoo,for Chevrolet,for Cadillac,for Holden),for Honda, for Infiniti,for Isuzu,for Jaguar,for KIA,for Hyundai,for Lancia,for Land Rover(for Defender,Discovery,Range Rover,Freelander),for Lexus,for Maybach,for Mazda,for Mini,for Mitsubishi,for Nissan,for Opel,for Peugeot,for Porsche,for Renault,for Saab,for Scion,for Seat,for Skoda,for Smart,for Sprinter,for Subaru,for Suzuki,for Toyota,for Vauxhall,for Volvo,for Volkswagen
SAS Support Car list
for Lancia,for Land Rover,for Lexus,for Maserati,for Maybach,for Mazda,for Mercedes Benz,for Mini,for Mistubishi,for Nissan,for Opel,for Peugeot,for Renault,for Romeo,for Scion,for Seat,for Skoda,for Subaru,for Toyota,for Vauxhall,for Volvo,for VW
Foxwell NT630 Plus ABS Airbag Scanner Free Upgrade Forever !!!
With internet access, you will always have the latest bug fixes, new vehicles, newly added parameters and functionality at your fingertips. Simply install the SD Card into your computer or an SD Card reader, log into the PC application, and click update. The application does all the work,syncing the latest software to your tool.
Package List:
1 pc x NT630 Plus Scan Tool
1 pc x User’s Guide
1 pc x Memory Card
1 pc x USB Cable
1 pc x Diagnostic Cable
1 pc x Blow Molding Case