Car 12V Battery Tester Analyzer Diagnostic Tool Topdon Cranking Charging Test

Description

Store category
Sign Up Now !
You may also like
Car 12V Battery Tester Analyzer Diagnostic Tool Topdon Cranking Charging Test
Product Description
AB101
is to help mechanics find the problem easily, quickly and accurately; testing cranking, charging, and common fault for all automotive cranking lead acid battery including ordinary lead acid battery, gel battery, AGM flat plate and spiral battery.
Shows SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and the readable analysis results on readable LCD screen for your reference
Support Mutil-Language:
English, Russian, Spanish, French, Italian, German
Battery Test
1) Good Battery: The battery is in good condition, and you can rest assured of using it;
2) Good, Recharge: It’s a good battery with low current, and please recharge it before next using;
3) Replace: The battery is almost or already broken, and you should replace the battery, or there will be a bigger danger;
4) Bad Cell, Replace: The battery is broken or damaged or has short circuit, and it’s time to replace the battery;
5) Charge-Retest: Unstable battery shall be recharged and retested to avoid error. If the same test result appears again, the battery is regarded as damaged, replace the battery.
Cranking Test
Quickly knows the whole state of the starting system according to the data:
1) Entering cranking test and starting the engine as prompted, tester will automatically complete the test;
2) The tester will display the result including actual cranking voltage and actual cranking time;
3) If cranking voltage value is lower than 9.6V, the cranking system is regarded as abnormal;
4) If cranking voltage value is higher than 9.6V, the cranking system is OK.
Charging Test
After the cranking test finished, do not shut down the engine, and press OK key to test charging system. The battery tester will take a few seconds to do ripple test, loaded volt test, and charging volt test in a sequence.
The tester displays results of charging volt, ripple test and charging test with reliable data for your reference.
1) Charging Volt: Normal – the generator output is normal, no problem detected;
2) Charging Volt: Low – check the drive belt of the generator and the connection between generator and battery, or follow the manufacturer’s suggestion to eliminate generator fault;
3) Charging Volt: High – replace the generator assembly or a regulator to avoid battery damages;
4) No Volt Output – check the generator connection cable and the belt;
5) Diode Test – there is at least one diode is damaged if ripple volt is too high.
Battery Type Range
The car battery tester is capable of comprehensive test coverage, providing a truly easy way for users to test different car batteries with extensive battery types, system standards and ratings more than the 100 to 2000 Cold Cranking Amps.
For all lead-acid battery types: Regular Flooded, AGM Flat Plate and Spiral, and Gel battery;
For most system test standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
Test Ways
The 12V battery analyzer brings the greatest convenience to you for easily performing any battery system test. Whether the car battery is in vehicle or out of vehicle, you can use the car battery analyzer to test it.
In-vehicle test: less interference factors, more accurate battery status test
Out-of vehicle test: timely checking, safer with reverse polarity protection
Reverse Polarity Protection
The reverse polarity protected design ensures the battery won’t be broken because of the short circuit.
Features
1 No complicated software update needed. You can directly use the battery tester as soon as you get it;
2 Plug-and-play design makes the battery analyzer very easy to use. No battery needed to power it on;
3 Quickly and smoothly testing, you can easily get the accurate tested results in seconds from easy-to-read LCD screen.
4 Engineered specifically with user-friendly in mind, this auto battery tester comes fully-loaded with such helpful features as extra-large clamps, high definition LED screen data display, and light-weight portability. Even if you’re not handy with a wrench, detailed instructions are also included for your convenience.
Specifications
Display: 220*176 LCD
Acid-proof plastic with silica gel buttons
CCA: Cold Cranking Amps (Range: 100~2000)
BCI: Battery Council International (100~2000)
CA: Cranking Amps (100~2000)
MCA: Marine Cranking Amps (100~2000)
JIS: Japan Industrial Standard (26A17~245H52)
DIN: German Auto Industry Committee (100~1400)
IEC: Internal Electrical Technical Commission (100~1400)
EN: European Automobile Industry Association (100~2000)
SAE: Society of Automotive Engineers (100~2000)
GB: China National Standard (30Ah~200Ah)
Accessories
1Main Unit
2 User Manual
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal payment.
Please contact us if you need to use another method to pay.
Payment should be made within
7 days
after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
Delivery details
Shipping
Order will be shipped
within 1 business
day after payment confirmed.
We have warehouse in
USA，UK，HongKong，Australia，Russian，Germany
and China warehouse.
From our US/UK/RU/DE/AU warehouse via UPS or DHL eCommerce shipping
Delivery time varies from 2 to 6 business days.
From our Hong Kong warehouse via DHL or FedEx Ground
Delivery time varies from 3 to 5 business days.
From our China warehouse
For US buyers,
we use e-Packet (Delivery time is 5-12 business days) or express delivery(Delivery time is 3-7 business days) .
For other countries' buyers,
we use China Post or Hong Kong Post(Delivery time varies from 10 to 25 business days)or Express delivery(Delivery time is 3-7 business days).
We will ship according to your PayPal address.
Please make sure it is correct and include phone number for delivery
.
If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
Please include your special requests in eBay note if there is any.
Terms of sales
We are authorize distributor, our all items are 100% original and Our devices have warranty,
12 months free repair for the devices.
3 months for the accessories.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us as soon as possible and keep it unused.
We will instruct you on how to return and get refund or replacement.
If the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
About us
Who We Are?
We are specialized dealer of On-Board Diagnostic tools and automotive electronics
for more than 10 years.
We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands,
and more brands will be show in our store in near future.
What Do We Have?
We have office and warehouse in Australia and US to ensure fast shipment and after-sale service.
We have more than 50 employees devoting to customer satisfaction.
Terms of tax:
We are not responsible for buyer's
local taxes, please consult your local Customs for tax details.
Contact us
Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.
Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.
We will reply in 24 business hours.
Business time: GMT8 (9:00-18:00) from Monday to Friday.
Feedback
On Aug-05-20 at 23:47:19 PDT, seller added the following information: