Car Battery Tester 12V 24V 100-2000CCA Cranking Charging System Battery Analyzer

Description

Store category
Sign Up Now !
You may also like
Car Battery Tester 12V 24V 100-2000CCA Cranking Charging System Battery Analyzer
Product Description
FAQ
Q: Is BT100/BT200 able to test vehicle alternator?
A: they can test alternator.
Q: Will BT100/BT200 hold last test results in memory?
A: Yes, it will keep the last test results for data review.
Q: Is BT100/BT200 able to test motorcycle batteries?
A: It can test 12V battery, between 100 and 2000 CCA. If the motorcycle battery is
within these values, then yes.
Q: How to set the CCA range?
A: You can set the data near to the CCA standard number of your battery.
Q: Can the firmware be updated?
A: BT100/BT200/BT500P is a basic tool, so a firmware update would not be needed.
Q: Does it test 12V deep cycle batteries?
A: Yes, it does.
Q: Will BT100 work on motorcycle charging systems?
A: It works on a 12V system and the CCA range is between 100-2000.
Q: Will this tester work with marine batteries?
A: Yes, it can work with marine batteries.
Q: Will this accurately load test ATV batteries?
A: Yes, it can accurately load test ATV batteries.
Q: What does SOH, SOC, and RES mean?
A: The SOH refers to the “State of health”. The SOC is the “State of charge” and the
RES is the “resistance value” of the battery.
Warning
DO NOT place the tester near the engine or exhaust pipe to avoid damage from
high temperatures.
DO NOT smoke, cause sparks, or strike matches near the battery when testing.
DO NOT remove battery clamps while testing.
DO NOT put the tester into a highly humid or dusty environment.
DO NOT disassemble the tester.
TOPDON BT100
is a handy tool which allows you to check the battery status quickly and without spending so much on mechanic fees. Whether you are a professional car electrician or the proud owner of a home garage, you need this tool in your arsenal. You never know when your car battery would fail and this tool will help you diagnose it in seconds.
Functions
Use TOPDON Battery Tester to see whether your car battery is OK.
BATTERY TEST :
Display SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and the readable analysis results on backlight LCD screen and smart 3 LED indicators;
CRANKING TEST :
Analyzes the actual cranking voltage and the cranking time to help you quickly figure out the whole state of the starting system;
CHARGING TEST :
Test different parts of charging system, including generator, rectifier, rectifier diode, and so on for a reliable charging volt value.
Feature
Run Multi-tests in One Button
:
All-in-one car battery tester with cranking and charging system test, load and alternator checking.
Design for Dummies
:
Unique smart 3 LED indicators directly show the battery status whether it is good, bad, or need to recharge.
Fast & Accurate Results
:
High precision amplifier and calibrated by professional instruments give you the reliable results in seconds!
In / Out of Vehicle
:
Two test modes, support both in and out of vehicle test.
Support Muti-languages
:
Support 6 languages. English, Russian, Spanish, French, Italian, and German.
Compatibility
Please be noted that battery type and CCA values (Cold Cranking Amp) marked onthe battery label. Please refer to it before using BT100.
1. Regular Flooded
2. AGM Flat Plate
3. AGM Spiral
4. GEL
5. EFB
Note: If your vehicle battery is not the battery mentioned above and you are not sure about which type it is, please choose AGM to conduct test, and the error is within 10%.
Technical Specification
Display: 128x64 LCD display
Working Temperature: -20°C~65°C (-4°F~140°F)
Storage Temperature: -20°C~70°C (-4°F~158°F)
Dimensions: 136.5mm*75.5mm*22.5mm
Weight: 260g
Package List
TOPDON BT100 Vehicle Battery Tester
User Manual
TOPDON BT200
, a new-released automotive battery tester, combines quality and value
for those who need to test 12 and 24-volt batteries up to 2000 CCA. It can test VRLA, GEL, AGM, EFB, and regular flooded batteries with reverse polarity protection to avoid fatal errors or damage on the battery. Results are presented fast and accurately after connection.
Features:
TOPDON BT200, an excellent device that enables you to check battery condition with ease and simplicity, equips with key features to give you a comprehensive analysis of your battery’s lifespan:
·
Test 12 and 24-volt batteries
·
Tests multiple battery types— VRLA, GEL, AGM, EFB, and regular flooded batteries
·
100-2000 CCA testing capacity
·
Ideal for cars, light trucks, RVs, motorcycles, ATVs, boats, etc.
·
Battery check, cranking check, charging check
·
More fast and accurate result presentation
·
Reverse polarity protection
·
Firm and secure battery clamps
·
Small and compact design
·
Operation is guided through each step in the testing process
·
Ergonomic design for better grip
·
The latest test can be retrieved in the data review section
·
Multi-language support
·
Save a lot of money down the road
·
2. 4" LCD for clear test results showing
·
No harm to batteries
Functions:
Battery testers range from a simple model of identifying how much charge is left in the battery to a complex model of analyzing battery-related system issues and potential issues that might impact its ability. The new-released TOPDON BT200 is specially designed to make the battery testing work efficient and productive, to save you from a myriad of troublesome situations.
Battery test
reports the quality of the battery, and whether it needs to be replaced.
Cranking test
reports the cranking voltage, the cranking time, and whether the starting system works properly.
Charging test
reports a quick result of the charging system’s health status after increasing the RPM to 2500r/min.
The process of using the tester is straightforward
even for beginners.
The latest test results can be retrieved in the data review section to easily trace previous records.
Lightweight and compact to fit into a toolbox.
Easy to test independent batteries or test batteries under the hood.
The built-in multilingual system serves users all over the world.
The reference tables of battery health status
are attached to the user manual.
【Multiple Languages】
English, Spanish, German,
Japanese, French, Portuguese, Italian, Polish
SPECIFICATIONS:
Display: 2.4” LCD
Display Resolution: 320*240 Pixels
Cable Reach: 920 mm (36.22 inches)
Storage Temperature: -20°C~70°C (-4°F~158°F)
Working Temperature: -20°C~60°C (-4°F~140°F)
Dimensions (L*W*H): 178*94.5*33 mm (7*3.72*1.3 inches)
Weight: 440g (0.97lb)
PACKAGE LIST:
1*TOPDON Battery Tester BT200
1*User Manual
ArtiBattery TOPDON TD101,
adopting the advanced conductance testing technology, is to help mechanics find the problem easily, quickly and accurately; testing cranking, charging, and common fault for all automotive cranking lead acid battery including ordinary lead acid battery, gel battery, AGM flat plate and spiral battery.
Purchase Note:
Voltage test range: 8-16 VDC
Bullet Point:
1: ABOUT THIS 12V TESTER:
Topdon AB101 uses advanced conductance measurement technology, works on 12V passenger cars and light trucks, and accurately tests battery health status including voltage, cranking power, state of charge and more.
2:READABLE TEST RESULTS:
This load battery tester displays 5 easy-to-understand battery test results; ‘Good Battery’ / ‘Good Battery, Need Recharge’ / ‘Replace, Life Cycle’ / ‘Replace, Bad Cell’ / ‘Charge, Retest’. You can know the complete status of any vehicle’s battery health status with one simple test.
3:BATTERY TROUBLE SHOOTING:
The bad cell test tool supports cranking and charging test on almost all battery types of Ordinary Lead Acid, AGM Flat Plate, Spiral Plate, and Gel battery, to deeply diagnose car starting and charging system.
4:HIGH SAFETY & EASE OF USE:
This battery analyzer utilizes polarity reverse-connection protection to avoid harming the car battery or tester, and provides you with the convenience of directly testing low batteries in vehicle or out of vehicle.
5:EXTENSIVE APPLICATION:
The battery tester supports English, Russian, Spanish, French, Italian, German and battery system standards of CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB, for new or experienced users.
Features:
1. Battery Test displays SOH (State of Health), SOC (State of Charge), Voltage, Current, Rating, and the readable analysis results on readable LCD screen for your reference;
2. Different Battery Test Result Displayed:
1) Good Battery:
The battery is in good condition, and you can rest assured of using it;
2) Good, Recharge:
It’s a good battery with low current, and please recharge it before next using;
3) Replace:
The battery is almost or already broken, and you should replace the battery, or there will be a bigger danger;
4) Bad Cell, Replace:
The battery is broken or interiorly damaged or has short circuit, and it’s time to replace the battery;
5) Charge-Retest:
Unstable battery shall be recharged and retested to avoid error. If the same test result appears again, the battery is regarded as damaged, replace the battery.
3. Cranking Test to know the whole state of the starting system according to the data:
1). Entering cranking test and starting the engine as prompted, tester will automatically complete the test;
2). The tester will display the result including actual cranking voltage and actual cranking time;
3). If cranking voltage value is lower than 9.6V, the cranking system is regarded as abnormal;
4). If cranking voltage value is higher than 9.6V, the cranking system is OK.
4. Reliable data of Charging Test for your reference:
1). Charging Volt:
Normal – the generator output is normal, no problem detected;
2). Charging Volt:
Low – check the drive belt of the generator and the connection between generator and battery, or follow the manufacturer’s suggestion to eliminate generator fault;
3). Charging Volt:
High – replace the generator assembly or a regulator to avoid battery damages;
4). No Volt Output
– check the generator connection cable and the belt;
5). Diode Test
– there is at least one diode is damaged if ripple volt is too high.
Specification:
Display:
220*176 LCD Acid-proof plastic with silica gel buttons
CCA:
Cold Cranking Amps (Range: 100~2000)
BCI:
Battery Council International (100~2000)
CA:
Cranking Amps (100~2000)
MCA:
Marine Cranking Amps (100~2000)
JIS:
Japan Industrial Standard (26A17~245H52)
DIN:
German Auto Industry Committee (100~1400)
IEC:
Internal Electrical Technical Commission (100~1400)
EN:
European Automobile Industry Association (100~2000)
SAE:
Society of Automotive Engineers (100~2000)
GB:
China National Standard (30Ah~200Ah)
【Top Reasons to Choose】
TOPDON BT500P
is a great all-round battery tester, and showcases brilliant design and quality:
1. Easy to use and will enable you to check the battery status with ease and simplicity.
2. Provide functions to check battery health, alternator’s charging and starter’s cranking conditions.
3. Much wider test range (100-1700 CCA) and more accurate test results compared to others.
4. Tests all battery rating systems - CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
5. Compatible with Lead-Acid, regular flooded, AGM flat plate, AGM spiral, gel and deep cycle batteries.
6. Advanced conductive way to test. No need of a fully charged battery before the test.
7. Quick and accurate. The reliable tester offers results in just 10 seconds.
8. Small and compact. The tester is a handy device and a brilliant addition to any automotive toolbox.
9. Designed with a built-in printer for enjoying the comfort of accessing the data in hard-copy form, for better analysis and rectification.
10. Premium quality copper clip and wire keep guarantee to maintain a stable communication all throughout the testing process.
【What Is It Made For?】
This is a minor investment to save you from a potential headache of being stranded unexpectedly, and will gift you massive benefits in future.
1. Help you avoid the inconvenience of a roadside breakdown.
2. Help you keep a close eye on battery function and fix potential problems before they arise.
3. Help you check the battery status quickly and without spending too much on mechanic fees.
4. Lengthen the lifespan of your battery and enable you to fix problems quickly.
5. Ensure your batteries are always working at an optimum level.
6. Ensure your batteries will bring a reliable cold-weather starting.
7. Enable you to determine whether your automotive battery needs a jump start, or to be changed.
8. and more …
TOP
DON Battery Tester
BTMobile
Bluetooth Wireless iOS and Android App for 6-12V, 100-2000CCA lead-acid, Test SOH, SOC, Resistance, Cranking Voltage, Loaded, No-load Voltage, Charging Ripple etc.
- Wireless Battery Tester with App [BT MOBILE] get it FREE on APP STORE/GOOGLE PLAY
- 6 & 12 Volt Batteries Compatibility
- 3 LED Indicators
- Easy Battery Test
- Cranking Voltage Test
- Charging System Test
-Support Multi-Language:English, Japanese, Spanish, German, French, Italian, Portuguese, Polish.
Feature:
Your Battery Doctor
:Simply download and install the TOPDON BTMobile App from Apple Store / Google Play to
smartphones
or tablets (iOS 8.0 & Android 4.3, or above), and sync BTMobile Battery Tester, to experience the most advanced testing technology for 6~12V lead-acid batteries (100-2000 CCA) including regular flooded, AGM flat plate, AGM spiral, GEL and EFB; covering 10 major rating standards: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
Wireless Tester
:Linger throughout the workspace with this wireless battery tester to have an overall analysis of batteries health, via its precise and fast Battery Test, Cranking Voltage Test, Charging System Test, without losing a connection. Suitable for checking batteries in motor vehicles, light trucks, RVs, boats, SUVs, ATVs and even law tractors.
Fast & Accurate
:Starring STM-32 main chipset and the advanced conductance testing technology, TOPDON BTMobile offers you the reliable and accurate load-free
test results in seconds, with no need of fully recharging the battery.
Safe & Reliable
:Afraid of the electric shock, and the potential damage to the batteries? BTMobile is specially designed with Short-Circuit,
Reverse Polarity, and Over Voltage Protection, to ensure an ultra-safe
operation during battery testing.
Innovative & Compact
:Unique smart 3 LED indicators tell the battery status directly whether it is good, bad, or need to recharge. Even a beginner can use this portable tester to reveal everything about 6~12V batteries.
Complete Battery Diagnostics, No More Running to Local Mechanic
TOPDON BTMobile combines quality with great value, and is a brilliant pick for those who need a complete battery diagnosis.
Battery Test (for 12V battery):
Display SOH (State of Health), SOC (State of Charge),
Voltage, Current, Rating, and the readable analysis results on App:
Display SOH (State of Health, %):
Represents a measure of the battery’s ability to store and deliver
electrical energy, compared with a fresh battery.
Display SOC (State of Charge, %): Expressed as a percentage of its
rated capacity, a measure of its condition to assess the potential energy.
Display Battery Internal Resistance Value (mΩ): The lower the internal resistance, the more current the battery can output. The value above 15 milliohms indicates a broken battery (12V).
Cranking Voltage Test:
Analyze the actual cranking voltage, and the cranking
time to help you quickly figure out the whole state of the starting system
Cranking Voltage (Normally a Cranking Voltage value lower than 9.6V is regarded as abnormal.)
Cranking Time.
Charging System Test:
Test different parts of charging system, including
generator, rectifier, rectifier diode etc., for a reliable charging volt
value.
Loaded Voltage.
No-load Voltage.
Charging Ripple.
System Test (Overall Test for Battery):
Takes some of the guidance away, and offer an accurate insight into batteries’ status, if you are not sure about the battery type and its CCA value.
Battery Test.
Cranking Test.
Charging Test.
Wide Battery Coverage, Portable Tool in Any Occasions
TOPDON BTMobile helps you test batteries of many different kinds:
Wide range from 100 CCA to 2000 CCA, to give a super accurate CCA reading.
6~12 Volts Regular Flooded, AGM Flat Plate, AGM Sprial, GEL, and EFB batteries.
It is thus a great all-rounder, and is able to test the battery condition for:
- Motor Vehicles
- Light Trucks
- RVs
- Boats
- SUVs
-ATVs
-Law Tractors etc.
Easy 4 Steps, Ready and Go!
1. Turn off the ignition, all accessories,
and loads.
2. Make sure the Battery Terminals are clean.
3. Correctly and securely connect the Battery Clamps to the corresponding Battery Terminals (Red “+” to Positive; Black “–” to Negative).
4. Open the BT Mobile App, pair the Bluetooth, and there you go.
Multiple Languages
English, Japanese, Spanish, German, French, Italian, Portuguese, Polish.
NOTICE:
Always read the safety features section in the manual carefully to ensure optimum safety.
SPECIFICATIONS:
Working Temperature: -20°C~65°C (-4°F~140°F)
Storage Temperature: -20°C~70°C (-4°F~158°F)
Dimensions: 100*87*30 mm (3.94*3.43*1.18 inches)
Weight: 260g (9.17 oz)
PACKAGE LIST:
1*BT MOBILE Wireless Battery Tester
1*User Manual
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept PayPal payment.
Please contact us if you need to use another method to pay.
Payment should be made within
7 days
after bidding ends.
Otherwise a Unpaid Item case will be opened to you.
Delivery details
Shipping
Order will be shipped
within 1 business
day after payment confirmed.
We have warehouse in
USA
，
UK
，
HongKong
，
Australia
，
Russian
，
Germany
and China warehouse.
From our US/UK/RU/DE/AU warehouse via UPS or DHL eCommerce shipping
Delivery time varies from 2 to 6 business days.
From our Hong Kong warehouse via DHL or FedEx Ground
Delivery time varies from 3 to 5 business days.
From our China warehouse
For US buyers,
we use e-Packet (Delivery time is 5-12 business days) or express delivery(Delivery time is 3-7 business days) .
For other countries' buyers,
we use China Post or Hong Kong Post(Delivery time varies from 10 to 25 business days)or Express delivery(Delivery time is 3-7 business days).
We will ship according to your PayPal address.
Please make sure it is correct and include phone number for delivery
.
If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.
Please include your special requests in eBay note if there is any.
Terms of sales
We are authorize distributor, our all items are 100% original and Our devices have warranty,
12 months free repair for the devices.
3 months for the accessories.
Please contact us firstly when you need warranty service.
In case an item arrives faulty, please contact us in 30 days and keep it unused.
We will instruct you on how to return and get refund or replacement.
If after 30 days, or the item has been used, we have the right to decline your claim.
Items should be returned on buyers' cost for repair or replacement.
About us
Who We Are?
We are specialized dealer of On-Board Diagnostic tools and automotive electronics
for more than 10 years.
We are authorized first class distributor of Launch, Autel, Ausdom, Caska and Ehang brands,
and more brands will be show in our store in near future.
What Do We Have?
We have office and warehouse in Australia and US to ensure fast shipment and after-sale service.
We have more than 50 employees devoting to customer satisfaction.
Terms of tax:
We are not responsible for buyer's local taxes, please consult your local Customs for tax details.
Contact us
Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings.
Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case.
We will reply in 24 business hours.
Business time: GMT8 (9:00-18:00) from Monday to Friday.