GPS antenna for collar Garmin T5 TT10 TT15 K5 KT15 T9 spare part replacement

Description

SKU:
GP08183
Weight
: 1.6 oz
Spare part
: GPS antenna for collar for collar Garmin T5 TT15 series (3rd party produced, nylon)
Material
: Plastic cover with nylon band.
Advantage
: Extra strong nylon band construction, more tear resistant, longer working life, Easy movement cable without tension, internal GPS module have more efficiency, better GPS signal acquisition. Pre-stripped coaxial cable, ready for soldering.
Compatible with
: Garmin T 5, TT 10, TT 15, K 5, KT 15, T5x, TT15x
Repair experience level
: 7
(On a scale 0-is very easy and 10-very difficult. 7 mean medium complexity (requires disassembly of the case, the use of additional materials - glue, sealant, as well as advanced soldering)
Installation manual
:
1. Clean collar from dirt. Do not wet.
2. Unscrew 8 screws from main unit. Pull up plastic  cover.
3. Remove old sealant that protect cable of GPS antenna.
4. Carefully unsolder VHF connection pin and two pins of shocker transformer (if your collar TT10, TT15 or KT15).
5. Uscrew 4 small screw that hold main PCB on case (do not forget - one small also located under metal shield).
6. Carefully pull up Main PCB. Do not bend the board and do not press hard.
7. On bottom part of PCB you can found connection of GPS cable. Remove sealant and unsolder old cable.
Please be carefully to prevent damage and lost small element on main PCB.
8. Install new GPS antenna, solder and use sealant for protect connection from water.  Recommended MS Polymer based sealant for electronics use.
9. Assembly in reverse order. Apply sealant on cable hole for protect collar from water.
10. All done! Good job! Now your Garmin collar is in working condition and waterproof!