Meyer 22693DC Xpress Control New Factory Diamond Touch Pistol Grip E68 E88

Description

A Replacement Aftermarket Controller for the Meyer Xpress plow. This controller was made to replace the problematic factory 22693. The O.E.M. control is known for burning out and having the buttons pop off. It does not have the shake mode or the automatic raise and lower mode, but has the mount and dismount function. To Enable Mount and Dismount: To enter this mode, you have to double-tap the left button within 60 seconds of turning the control on. The center light on the control will turn blue, letting you know you are in mount and dismount mode and the switch on the front will now work. To exit this mode, you just tap any button and the blue light will go out. This is for Xpress plows only. The early Xpress plows used a wireless control, but because of some issues it was rewired and replaced with this 22693 pistol grip control. This has a 12-pin rectangle plug on the end of the harness with a relay adapter built into it. Control DOES NOT plug directly into your existing harness, Adapter required (Included) -Please make sure the connector matches your connector before ordering -4 way (for Straight Blade Controllers) or 10 way (for Vee & Wing Blades) operation -U-SET feature allows the user to change some of the controls features. -Automatic Shut-off when not in use, approximately 22 minutes -The plow blade will coast to a soft stop (left or right), results in smoother operation and decreased wear on the plows hydraulic system -Express Up/Down Feature (Double Tap) -On/Off switch can be used as an Emergency Stop when required -Illuminated keypad on control for night time plowing -All control functions will time out (shut-off) after a period of time. This helps reduce wear on the pump motor and prevent unnecessary battery drain. Time outs vary depending on which plow the control will be used for. -Flexible Straight Cord -Use for both Left or Right Hand