New Anderson Greenwood 1/2" NPT 6000PSI High Pressure Steel Valve PTFE H7VIC-44Q

Description

4229SA8D.1.23
New / Old Stock, Anderson Greenwood (now "Emerson") H7 Series 1/2" NPT Female x 1/2" Male 6000 PSI High Pressure Carbon Steel Valves, PTFE Packing, Hard Stem, 3/16 inch (4.8 mm) Orifice, Part Number H7VIC-44Q (02-173-003).  Each bid quantity is for One (1) Valve.  You may bid / buy any number, up to the total quantity available above.
These were purchased at an industrial liquidation last year, and they are new in the original factory boxes.  They are Old Stock, with minor cosmetic surface oxidation from storage condensation.  We used the worst one we could find for pictures, so the ones you receive should be better.  Boxes are flimsy, so we will tape them securely before shipping.
According to the calipers
:
Overall length:  3.510" / 89.15 MM
Height:  3.718" / 94.43 MM
Width:  1.429" / 36.30 MM
Threads:  1/2" NPT Male x 1/2" NPT Female
The part number H7VIC-44Q (02-1273-003) breaks down as follows:
H7: Valve Series
V: Packing - PTFE
I: Seat - Integral
C: Material - Carbon Steel
44Q: CONNECTIONS (INLET/OUTLET) - ½ inch MNPT x ½ inch FNPT
(02-1273-003): Probably an internal material traceability code
According to the manufacturer:
H7 SERIES
Hand Valves
3/16” (4.8 mm) orifice hard-seated hand valves for pressures to 6000 psi (414 bar)
General Application H7 series valves are designed for safe, repetitive bubble-tight closure, simple maintenance and a long, trouble-free life.
Features
• Ball end stem eliminates seat galling, provides bubble-tight shutoff and long life. Hardened, non-rotating ball ensures perfectly aligned closure.
• Packing below threads prevents lubricant washout, thread corrosion, process contamination and eliminates galling.
• Easily adjustable PTFE packing decreases replacement downtime and increases valve life.
• Dust cover protects stem from lubricant contamination.
• Safety back seating prevents stem blowout or accidental removal and provides a metal-to-metal secondary stem seal while in the fully open position.
• ENC plated 316 SS stem prevents galling or freezing of stem threads. CS valves use a 303 SS stem for'hard-to-soft' contact to prevent galling.
• Rolled stem and bonnet threads provide additional strength.
• Mirror stem finish in the packing area provides smooth operation and extends packing life.
• Metal-to-metal body-to-bonnet seal in constant compression prevents bonnet thread corrosion, eliminates possible tensile breakage and gives a reliable seal point.
• Metal seat can be resurfaced for longer valve life.