Replacement rubber buttons layer for Garmin Virb Elite spare part case (White)

Description

SKU
: GP03406
Weight
: 0.07 oz
Spare part
: Replacement rubber power button for Garmin Virb Elite series 1st generation (waterproof and flexible)
Compatible with
: Garmin Virb, Virb Elite
Installation manual
:
1. Remove battery cover, clean from dirt. Do not wet.
2. You can see the cut line on case. If the line is not visible, apply a new part as a template and draw the cut line.
3. Front part of case consist of plastic base and rubber layer. Carefully cut the rubber layer with a knife or a blade.
4. Remove by plastic tool old rubber layer of button.
5. Сlean the surface with ethyl alcohol.
6. You can use a primer for better adhesion. For example LOCTITE SF 770.
7. Spread glue on all prepared surface for better adhesion and waterproof. For example LOCTITE 454.
8. Carefully install the button and press down for good adhesion of the rubber to the plastic base. Wait 24 hours for better adhesion and solidification.
9. All done! Good job! Now your Garmin device is in working condition and waterproof!