Rubber buttons layer for Garmin eTrex 10 20 30 20x 30x 22x 32x spare part right

Description

SKU
: GP03303
Weight
: 0.07 oz
Spare part
: Replacement rubber buttons layer for Garmin eTrex 10, 20, 30, 20x, 30x, 22x, 32x series (right part: POWER ON/LIGHT, BACK)
Material
: Reinforced rubber (waterproof and flexible)
Compatible with
: Garmin eTrex 10, 20, 30, 20x, 30x, 22x, 32x
Installation manual
:
1. Remove batteries, clean case from dirt. Do not wet.
2. Front part of case consist of plastic base and rubber layer. Carefully cut the rubber layer with a knife.
3. Remove by plastic tool old rubber layer of button.
4. Сlean the surface with ethyl alcohol.
5. You can use a primer for better adhesion. For example LOCTITE SF 770.
6. Spread glue on all prepared surface for better adhesion and waterproof. For example LOCTITE 454.
7. Carefully install the button and press down for good adhesion of the rubber to the plastic base. Wait 24 hours for better adhesion and solidification.
8. All done! Good job! Now your Garmin eTrex is in working condition and waterproof!