Thinkcar OBDll Car All System ABS SAS TPS Diagnostic Tool OBD Automotive Scanner

Description

Store category
Sign Up Now !
You may also like
ELM327 WIFI OBD2 OBDII Auto Car Diagnostic Scan Tool Scanner for IOS Android
Product Description
2021 New Thinkcar Thinktool Mini 5.99 Inch Professional Automotive Code Reader Tester Full System with Free 28 Reset Function +Free Upgrade More than 100+ Car Brands + Bluetooth / Wifi connection ,Supported Auto VIN Scan /A/F Reset/ Action Test OBD2 Scanner Thinkstool Mini PK CRP909/CRP909X/MK808
Thinktool Mini Introduction
▼Thinktool Mini as the Highest-level FULL OBD II Diagnostic Device For DIY users supported include Code Reading/Clearing data stream,Actuation Test ,Special Functions etc
▼Free Use Reset Service function (currently 16 kinds, later will increase to 28 kinds)
▼Intelligent vehicle model identification via VIN
▼no need the cables contact with Car ,More Convenience
▼Free Upgrade Online
▼Pay for one Car model software can enjoy Free Upgrade 1 year the full system ,Such as :ECU Coding/ Action Test and other Special Function Cost: .95/year (you can buy from ThinkCar Store directly)
Thinktool MINI Full System Diagnostic:
To diagnose Brake System
if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;
To diagnose Emission System
if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;
To diagnose Fuel system
if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;
To diagnose Transmission
if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;
To diagnose Wiper System
if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;
To diagnose Light System
if you see rapid signal blinking or dimming lights.
And many more ...
Thinkcar Thinktool Mini Car Diagnostic Tablet is the 2021 Newest evolutionary Android smart solution for 12V passenger car,light duty,pickup truck diagnosis & maintenance.Covering more than 93 car brands.it's design for car repair garage,car beauty service parlors, auto mechanic and DIY car owners Highest-Level Auto scanner . Diagnostics cover all vehicles that support the OBD protocol after 1996. Thinkscan Max OBD2 Scanner support All systems Diagnoses, All OBD-II functions,16 Reset All OBD-II functions. Besides,Also Supported ECU Coding /Action Test and other Special Function
Thinktool Mini Supported 28 Kinds of Reset Service
1. Oil Reset
.The lightening of the car maintenance light indicates that the vehicle needs maintenance.Reset themileage or driving time to zero after the maintenance, so the maintenance light will go out and the systemwill start a new maintenance cycle.
2. Elec.Throttle Adaption
Elec. Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learningvalue of the ECU returns to the initial state.By doing these, the movement of the throttle (or idle motor)can be more accurately controlled, thus adjust the intake volume.
3. Steering Angle Reset
To reset the steering angle, first find the relative zero point position for the car to drive in straight line.Taking this position as reference, the ECU can calculate the accurate angle for left and right steering.After replacing the steering angle position sensor, replacing steering mechanical parts (such as steeringgearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recoveringcar body, you must reset the steering angle.
4. Battery Matching
This function enables you to perform a resetting operation on the monitoring unit of vehicle battery, inwhich the original low battery fault information will be cleared and battery matching will be done.
5. ABS Bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system torestore ABS brake sensitivity. lf the ABS computer,ABS pump, brake master cylinder, brake cylinder, brakeline, or brake fluid is replaced, the ABS bleeding function must be performed to bleed the ABS.
6. Break-pad Reset
lf the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to theon-board computer to replace the brake pad.After replacing the brake pad, you must reset the brake pad.Otherwise, the car alarms.
7. DPF Regeneration
DPF regeneration is used to clear PM (Particulate Matter) from the DPF filter through continuouscombustion oxidation mode (such as high temperature heating combustion, fuel additive or catalyst reducePM ignition combustion) to stabilize the filter performance.
8. Gear Learning
The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computerto more accurately diagnose engine misfires. lf gear learning is not performed for a car equipped withDelphi engine, the MlL turns on after the engine is started.The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car.After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, orcrankshaft flywheel is replaced, or the DTC 'gear not learned" is present, gear learning must be performed.
9. IMMO Service
To prevent the car being used by unauthorized keys, the anti-theft key matching function must beperformed so that the immobilizer control system on the car identifies and authorizes remote control keysto normally use the car. When the ignition switch key, ignition switch, combined instrument panel,ECu,BCM, or remote control battery is replaced, anti-theft key matching must be performed.
10. Injector Coding
Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder soas to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced,injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identifyinjectors to accurately control fuel injection.
11. TPMS Reset
After the tire pressure MIL turns on and maintenance is performed, the tire pressure resetting functionmust be performed to reset tire pressure and turn off the tire pressure MIL.Tire pressure resetting mustbe performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tirepressure monitoring device is replaced or installed, tire is replaced, tire pressure sensor is damaged,andtire is replaced for the car with tire pressure monitoring function.
12. Suspension Matching
This function can adjust the height of the body. When replacing the body height sensor in the airsuspension system, or control module or when the vehicle level is incorrect, you need to perform thisfunction to adjust the body height sensor for level calibration.
13. AFS Reset
This feature is used to initialize the adaptive headlamp system.According to the ambient light intensity, theadaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjustthe headlamp lighting angle while monitoring the vehicle speed and body posture.
14. A/T Learning
This function can complete the gearbox self-learning to improve gear shifting quality. When the gearbox isdisassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impactproblem. In this case, this function needs to be done so that the gearbox can automatically compensateaccording to the driving conditions so as to achieve more comfortable and better shift quality.
15. Sunroof Initialization
This function can set the sunroof lock off, closed when it rains,sliding / tilting sunroof memory function,temperature threshold outside the car etc.
16. EGR Adaption
This function is used to learn the EGR (Exhaust Gas Recirculation) valve after it is cleaned or replaced.
17. ODO Reset
a) ODo reset is to copy,write, or rewrite the value of kilometers in the chip of odometer by using a car diagnostic computer and data cable, so that the odometer shows the actual mileage. b)Usually when the mileage is not correct due to the damaged vehicle speed sensor or odometer failure, it is necessary to do ODo reset after maintenance.
18. Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collidesand the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicatorlights up, and the fault code cannot be cleared. Since the data inside the airbag computer is disposable,it is required that all new accessories must be replaced, but after performing this function, the data of theairbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and theairbag computer can continue to use.
19. Transport Mode
ln order to reduce power consumption, the following functions may be disabled,including limiting thevehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At thistime, the transport mode needs to be deactivated to restore the vehicle to normal.
20. A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
21. Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function inECU(provided that the vehicle has a hidden function and supported by hardware).
22. NOx Sensor Reset
NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx) in engine exhaust. lf theNOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalyticconverter learned value stored in the engine ECu.
23. AdBlue Reset (Diesel Engine Exhaust Gas Filter)
After the diesel exhaust treatment fluid (car urea) is replaced or flled up, urea reset operation is required.
24. Seat Calibration
This function is applied to match the seats with memory function that are replaced and repaired.
25. Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
26. Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
27. Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover theautomatic ascending and descending function of power window.
28. Language Change
This function is used to change the system language of the vehicle central control panel.
Thinktool mini supports languages:
English, French, German, Spanish, Russian, Italian, Portuguese, Japanese
Complete OBD2 functions:
Reading Codes:
Show the detailed description of the Diagnostic Trouble Code (DTCs)
Erasing Codes & Reset:
Turns off Check Engine Light (MIL), clears codes and resets monitors.
Data Stream:
Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
I/M Readiness Status:
Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
Read Live Data Stream:
Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
View Freeze Frame Data:
Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
O2 Sensor Test:
Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle’s on-board computer.
On-Board Monitor Test:
Retrieves and displays test results for emission-related powertrain components and systems.
Read Vehicle Information:
Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
Component Test:
Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
ECU Coding:
The ECU Coding of this diagnostic tool can work on most vehicle makes. It is used to reprogram adaptive data for vehicle control modules after repairs or replacements of vehicle parts.
If you extra purchase the car software, you can use all functions on this manufacturer's software, including all programming functions, at a cost of .95/year.
Active Test:
The Active Test function is used to access vehicle-specific subsystem and component tests. Available test vary by manufacturer, year, and model, and only the available tests display in the menu.
Support more than 220+ Car Brands
Package:
1 x Thinktool Tablet
1 x OBD Adapter
1 x USB External Power Adapter
1 x User Manual
1 x Quick Reference Guide
1 x Carry case
1 x Mini USB Cable
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
-
We accept payment via Paypal, Visa / MasterCard, Discover Card, American Express etc.
-
Payment must be made within 8 days.
If you don't make the payment within 8 days, you may received a Non-payment message
automatically
sent
f
rom eBay. Non-payment may result in an UPI
(Unpaid Item), eBay will
automatically close your account
if you accumulate 4 UPI's total.
Total amount due includes the final
auction price plus S&H(Shipping and Handling).
-Your package will be out
within
1 business day
or
6-24 hours
after payment cleared
(not including holiday and weekend)
.
Delivery details
-Located in CA, US and KY, US.
-
Shipping terms
:
USPS First Class Mail Tracked Service
:
3-7 days. (
default
delivery
mode
)
UPS Surepost Service: 2-7 days.
UPS GROUND Service:
1-5 days.
U
SPS Priority Mail Parcels Tracked Service:
1-
3 days
.
-
Shipping address supplied by Paypal is acceptable.
-If your package delayed few days, due to any unexpected factor, please wait patiently. Your kindly understanding and great patience would be highly appreciated!
Terms of sales
-Please do not hesitate to leave us your
Positive
Feedback
and
5
-
stars
★★★★★
of DSR,
they are our life.
-I
f you
are unsatisfied
with your purchase,
please email us first to get a better solution
before
you leave a
neutral
or
negative feedback
,
we work hard to make sure every customer 100% satisfied and resolve any problem for you. Thank you
for your kindness.
About us
-We supply many products on Automobile consumer. And we are a professional Authorized dealers of
AUTEL
,
A
NC
E
L
,
A
U
T
O
PHI
X
,
F
O
XWELL
,
KZYEE
,
LAUNCH
,
NEXAS
,
Autek
etc. Also offer reasonable prices , excellent customer service and a reliable credit standing are our target!
-We are eager to be your professional partner of automobile diagnostic tool.
-We support remote assistance by TeamViewer if you have any difficulty in software installation.
Contact us
If you have any further queries, pls do not hesitate to
email us
by eBay message freely
before open a dispute/case or leave neutral/negative feedback.
We are grateful for your kind support!
Feedback